Recently, ETSI has released two official versions of the new standards

ETSI EN 301 489-3 V2.1.1 (2019-03)、ETSI EN 301 489-19 V2.1.1 (2019-04) and a draft version of the new standard Draft ETSI EN 301 489-1 V2.2.1 (2019-03)；

Among them, the new standard for these two official versions only gives the specific date of doa, dop and dow, and other contents are the same as the original draft version, that is to say, there is no technical difference.

ETSI EN 301 489-3 V2.1.1 (2019-03) national transposition dates:

ETSI EN 301 489-19 V2.1.1 (2019-04) national transposition dates :

For Draft ETSI EN 301 489-1 V2.2.1 (2019-03), Compared with the

Draft ETSI EN 301 489-1 V2.2.1 (2017-03), there is no technical difference except that the limit value of DC port conduction test is relaxed.

Draft ETSI EN 301 489-1 V2.2.1 (2017-03) DC port conduction limits have two types

1. outside of telecommunication centers and industrial environments:

2. use in telecommunication centers and industrial environments:

While the Draft ETSI EN 301 489-1 V2.2.1 (2019-03) DC port conduction limit only keeps one of them:

Currently, We has completed the introduction of the three new standards.

Welcome to contact us.

Should be noted that

ETSI EN 301 489-3 V2.1.1 (2019-03) & ETSI EN 301 489-19 V2.1.1 (2019-04) Normative references standard is still Draft ETSI EN 301 489-1 V2.2.1 (2017-03) not the latest Draft ETSI EN 301 489-1 V2.2.1 (2019-03)；

If it is specified that the latest Draft ETSI EN 301 489-1 V2.2.1 (2019-03) should be reflected in the demand report, it shall be explained before the project testing.