login | | | EN
Location:Home - Service Center - About the standard of the fast SAR
About the standard of the fast SAR

For SAR testing is too much required and it's took too much time. If your product have support the smart antenna, p-sensor and power redownationyou will take 13 month to test. The IEC is currently working on new regulations, IEC 62209-3 ED1 and IEC/IEEE 62209-1528 ED1.

 

IEC 62209-3 ED1Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 3: Vector probe systems (Frequency range of 100 MHz to 6 GHz)

Its define the require for the Vector probe systems, at the time , we refer the IEC PAS 63151-2018


IEC/IEEE 62209-1528 ED1Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures: Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices (Frequency range of 4 MHz to 10 GHz)

In this standard is combine the IEEE 1528 and IEC 62209-1 / -2, and add how to reduce the test by the robot SAR system and fast SAR system at the same time.

 

The progress of the regulations is as follows

 

● Jan-2019 : final text for FDIS revised by all IEC TC106 experts

 

● March-2019 : the document is sent to the National Committees members for final review

 

● May-2019 :  FDIS is ready for publication

 

How to quickly finish the SAR test? It’s a big problem for all test lab, but now, it have two device are cSAR 3D and art-man on the market and the standard will be complete. About the SAR test will be reduce a lot of test time in feature.


LINK: CETECOM

Copyright © 2008-2019 BTL Inc. All Rights Reserved ICP NO.18145055